Production speaker path now runs on moq-lite, so connectNestsSpeaker
exchanges real moq-lite framing with the nostrnests reference relay.
Transport layer:
- WebTransportSession.incomingBidiStreams() — peer-initiated bidi
flow. moq-lite publishers receive Announce + Subscribe bidis from
the relay (rs/moq-lite/src/lite/publisher.rs:40 uses
Stream::accept(session)), so the abstraction grew the
accept-bidi-from-peer surface.
- WebTransportSession.openUniStream() — locally-opened uni stream
for group push (rs/moq-lite/src/lite/publisher.rs:338 uses
session.open_uni()).
- :quic WtPeerStreamDemux StrippedWtStream now carries optional
send/finish closures. The demux takes the QuicConnectionDriver
so wakeups fire after each app-level write on a peer-initiated
bidi.
- FakeWebTransport now exposes incomingBidiStreams + openUniStream
directly; the openPeerUniStream test helper went away (production
flow covers it).
Session layer:
- MoqLiteSession.publish(suffix) — claims a broadcast suffix and
lazily launches a relay→us bidi pump. ControlType=Announce reads
AnnouncePlease, replies Active(suffix). ControlType=Subscribe reads
body, replies SubscribeOk, registers the inbound subscription.
- MoqLitePublisherHandle — startGroup / send / endGroup / close
semantics. send opens a uni stream per group with DataType=0 +
GroupHeader and pushes varint(size)+payload frames. close emits
Announce(Ended) on every active announce bidi, FINs the uni.
Application layer:
- AudioRoomMoqLiteBroadcaster — sibling of AudioRoomBroadcaster but
drives MoqLitePublisherHandle (keeps IETF broadcaster intact for
its unit tests).
- MoqLiteNestsSpeaker — NestsSpeaker adapter, mirror of
MoqLiteNestsListener on the publish side.
- connectNestsSpeaker now opens a MoqLiteSession (no SETUP) and
returns MoqLiteNestsSpeaker.
Tests:
- 4 new MoqLiteSessionTest cases:
publisher_replies_to_announcePlease_with_active_announce,
publisher_acks_subscribe_and_pushes_group_data_on_uni_stream,
publisher_send_returns_false_when_no_inbound_subscriber,
publisher_close_emits_ended_announce.
Verified :commons:compileKotlinJvm + :amethyst:compilePlayDebugKotlin
both still compile against the swap.
Docs (plans + CLAUDE.md) refreshed to reflect speaker-side landing.
Phase 5d wrapped, so the doc set now reflects "listener path done,
speaker pending":
- nestsClient/plans/2026-04-26-moq-lite-gap.md — new "Implementation
status" section maps phases 5a → 5d to commits, calls out the
speaker side as blocked on a small `WebTransportSession.acceptBidi`
extension (since publisher.rs:40 uses Stream::accept), and points
at the existing :quic primitive (QuicConnection.awaitIncomingPeerStream)
that the bridge can lean on.
- nestsClient/plans/2026-04-26-audio-rooms-completion.md — Phase M1
is no longer "on hold for moq-lite"; manual nostrnests.com
validation should now work end-to-end on the listener path.
- .claude/CLAUDE.md — :nestsClient now hosts both IETF MoQ-transport
and moq-lite Lite-03; production listener path uses moq-lite.
Background research turned up the complete moq-lite (Lite-03) wire
format from kixelated/moq-rs and @moq/lite v0.1.7. Folded the spec
into nestsClient/plans/2026-04-26-moq-lite-gap.md as a phase-5
implementation plan:
- ALPN ("moq-lite-03"); no SETUP/control message in Lite-03 (the WT
handshake IS the handshake)
- Per-request bidi streams keyed by ControlType varint (Announce=1,
Subscribe=2, Fetch=3, Probe=4)
- AnnouncePlease(prefix) / Announce(status, suffix, hops) shape
- Subscribe with priority (raw u8), ordered, maxLatency (ms),
startGroup/endGroup (off-by-one None-encoded), reply Ok/Drop
- Group = uni stream with (DataType=0, subscribeId, sequence)
header followed by varint-length frames until QUIC FIN
- No datagrams; no per-frame envelope beyond size
- Mandatory path normalisation; FIN-as-unsubscribe; RESET_STREAM
for errors
Phase-5a..e implementation plan included (~1 week scope).
Doc + KDoc updates so the IETF MoQ-transport code is correctly
labelled and the moq-lite gap is discoverable from every entry point:
- .claude/CLAUDE.md project description and architecture diagram
- nestsClient/plans/2026-04-26-audio-rooms-completion.md status block
- MoqSession.kt, MoqMessage.kt, MoqObject.kt, MoqCodec.kt KDoc — flag
these as "IETF draft-ietf-moq-transport-17, NOT moq-lite", with
pointers to the gap doc
- NestsConnect.kt — note that step 3 of the listener handshake
(SETUP) does NOT match nostrnests's relay framing
Two new module-local plan docs (per CLAUDE.md's "plans live in the owning
module" rule) and a sweep of stale inline phase references.
quic/plans/2026-04-26-quic-stack-status.md:
Post-mortem of the original docs/plans/2026-04-22 plan. Documents
what shipped vs what was estimated, the actual package layout (~8.5k
LoC, 39 test files, 5 audit rounds), the crypto delegation surface
(Quartz only — no BouncyCastle, no JNI), interop verification status
(aioquic + picoquic; nests not yet), and known deferred items
(STREAM retransmit, Initial-key discard, etc.).
nestsClient/plans/2026-04-26-audio-rooms-completion.md:
Punch list to ship audio rooms end-to-end:
M1 Listener wire-up in Amethyst UI
M2 Multi-speaker audience UX
M3 Foreground service for backgrounded playback
M4 Manual interop pass against nostrnests.com
M5 MoQ publisher path (ANNOUNCE / TrackPublisher)
M6 Capture → encode → publish pipeline
M7 NestsSpeaker API
M8 App polish (reconnect, leave cleanup)
M9 Foreground service for speakers
~6 weeks for full audio rooms; ~2 weeks for listener-only MVP.
Inline doc cleanup:
* Removed "Phase 3a/3c-1/3c-2/3c-3" / "Phase B/C/D-K/L" references
from active code; replaced with "today" or pointers to the
completion plan
* Removed "Kwik-based stub" references; QuicWebTransportFactory and
surrounding docs now describe :quic as the production path
* TlsClient header reflects non-null certificateValidator + the
JdkCertificateValidator / PermissiveCertificateValidator split
* SendBuffer header documents the best-effort no-retransmit mode
explicitly (was hidden behind a "Phase L will fix this" note)
* MoqMessage / MoqObject / MoqSession reflect listener-side as
shipped + publisher-side as Phase M5
CLAUDE.md:
* Module list now includes :quic and :nestsClient (was 5 modules,
now 7)
* Architecture diagram + sharing philosophy explain what each new
module owns
No production behaviour changes; doc + comment-only edits. Tests green.
https://claude.ai/code/session_01EC1tfXfap8k8GyKvrxkxZx
- Add desktopApp module with JVM entry point and sidebar navigation
- Add Claude specs for AI-assisted development:
- Agent definitions: nostr-protocol, kotlin-multiplatform, compose-ui, kotlin-coroutines
- Skills: quartz-kmp conversion, compose-desktop patterns
- Commands: desktop-run, nip, extract
- Update Gradle configuration with Compose Multiplatform 1.7.1 plugin
- Add coroutines and secp256k1 JVM dependencies to version catalog
Next steps:
- Convert Quartz library to full KMP (expect/actual for crypto)
- Implement relay connections in desktop app
- Share UI components between Android and Desktop
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Claude