Convert gOddTable, gLamTable, and combTable from `by lazy` to eager
initialization. These tables are accessed on every verify (mulDoubleG)
and sign (mulG) call.
On K/Native, each `by lazy` access goes through
SynchronizedLazyImpl.getValue() — a thread-safe lock check + memory
barrier. The native disassembly showed 2 SynchronizedLazyImpl calls
per mulDoubleG invocation.
On JVM, Kotlin's lazy delegates use double-checked locking via
SynchronizedLazyImpl, adding interface dispatch + volatile read on
every access.
Move the `scratch` (ScratchLocal) field declaration before the table
fields to satisfy initialization order — buildGOddTable() and
buildCombTable() use doublePoint/addPoints which call scratch.get().
https://claude.ai/code/session_015CtM5k88rF7WFgX8o2AGNR
Three bytecode-level optimizations to the Schnorr verify path:
1. Replace `by lazy` delegates with direct field init for tag hash
prefixes (CHALLENGE_PREFIX, AUX_PREFIX, NONCE_PREFIX). Eliminates
Lazy.getValue() interface dispatch + checkcast on every call.
2. Use explicit copyInto parameters everywhere, eliminating the
copyInto$default bridge method (bitmask + 3 branches + arraylength
per call). 4 calls per verify × 3 using defaults = 12 extra branches
removed from the hot path.
3. Extract shared verify computation into verifySchnorrCore(), called
by both verifySchnorr() and verifySchnorrFast(). Previously, two
~400-bytecode near-identical methods competed for JIT optimization.
Now one hot method gets compiled, and both public methods are thin
wrappers (34 and 130 bytecodes).
JVM benchmark before: verifySchnorrFast was 5% SLOWER than verifySchnorr
(60,930 vs 57,876 ns) due to JIT warmup ordering bias.
JVM benchmark after: verifySchnorrFast is 11% faster (50,345 vs 56,143 ns),
matching the expected ~14% savings from skipping the field inversion.
https://claude.ai/code/session_015CtM5k88rF7WFgX8o2AGNR
Add verifySchnorrBatch to Secp256k1InstanceOurs wrapper and add
Android benchmark tests for batch(8) and batch(16).
To get per-event cost: ns/op ÷ batchSize.
JVM benchmark showed 4-7× speedup over individual verify.
Android results TBD.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
The previous commit replaced ALL uLt calls with uLtInline (XOR trick),
which regressed JVM verify from 1.6× to 1.9× vs native C. The XOR trick
is slower than Long.compareUnsigned on HotSpot.
Fix: uLtInline is used ONLY inside the fused FieldMulPlatform.kt inline
functions (which JVM doesn't use — it uses the unfused path). All other
code (U256.addTo/subTo, FieldP.add/sub/half, ScalarN, Glv) keeps the
expect/actual uLt which uses Long.compareUnsigned on JVM.
JVM: verifySchnorrFast 1.3× (restored, improved)
Android: uLt overhead remains for non-fused paths (~11K calls/verify)
but the fused mul/sqr path (the dominant cost) is fully inlined.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Trace profiling showed unsignedMultiplyHighFallback at 16.9% of verify
time (32,524 calls × 82ns = 2.674ms). Although called from inside an
inline crossinline lambda, the function itself was a regular dispatch.
Adding @Suppress("NOTHING_TO_INLINE") inline makes the Kotlin compiler
embed the 4-multiply arithmetic directly at each call site, eliminating
all function dispatch overhead.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Trace profiling on Pixel 8 revealed two massive overhead sources:
1. ExternalSyntheticBackport0.m — 17.5% of verify (3.45ms)
D8/R8 desugaring wraps Math.unsignedMultiplyHigh in a synthetic
backport because minSdk=26 < 35. The backport adds 139ns per call
× 24,875 calls. The actual UMULH intrinsic is ~1ns, but the
wrapper adds ~138ns.
FIX: Use pure-Kotlin unsignedMultiplyHighFallback on Android instead
of Math.unsignedMultiplyHigh. The fallback (4 Long multiplies +
shifts, ~10-20ns) is FASTER than the backported intrinsic (139ns).
Removed all API-level dispatch — a single fallback path for all
Android versions.
2. uLt function calls — 20.7% of verify (4.08ms)
The expect/actual uLt (can't be inline) was called 49,924 times
per verify at 82ns each. Most calls came from the fused
fieldMulReduceWith/fieldSqrReduceWith inline expansions.
FIX: Add uLtInline — a private inline function using the XOR trick
directly. Since it's @Suppress("NOTHING_TO_INLINE") inline, the
Kotlin compiler inlines it at every call site (not the JIT).
Replaces all 55 uLt calls in the fused inline functions.
JVM is unaffected (uses unfused path with Long.compareUnsigned).
Combined: eliminates ~38% of verify overhead on Android.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Wire verifySchnorrFast (x-check only, no y-parity inversion) into:
- Secp256k1InstanceOurs wrapper for app-level usage
- Android benchmark as verifySchnorrFastOurs for Pixel 8 measurement
Expected: ~15% faster than verifySchnorrOurs (~100μs vs ~120μs on Pixel 8)
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
BIP-340 verification checks both R.x == r AND R.y is even. The y-parity
check requires a full field inversion (~270 field ops, ~14% of verify).
verifySchnorrFast skips the y-parity check, verifying only the
x-coordinate in Jacobian coordinates (2 field ops, no inversion).
WHY THIS IS SAFE FOR NOSTR:
For a given x on secp256k1, there are exactly 2 points: (x, y_even) and
(x, y_odd). A signature producing the correct x but wrong y-parity would
require solving the discrete log — equivalent to forging the signature.
The y-parity check is defense-in-depth, not a distinct security boundary.
DO NOT use for Bitcoin/financial protocols — use verifySchnorr for strict
BIP-340 compliance.
JVM benchmark:
verifySchnorrFast: 20,706 ops/s (1.4× vs native C)
verifySchnorr: 18,038 ops/s (1.6× vs native C)
Improvement: ~15% faster
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Allocation audit from Android benchmark showed 19 allocs in signSchnorr
and 4 in verifySchnorr. Most were intermediate ByteArray/LongArray that
can be replaced with pre-allocated scratch buffers.
Changes:
- Add sha256Into() (expect/actual) that writes digest into existing buffer
instead of allocating a new ByteArray(32) per call. Uses
MessageDigest.digest(buf,off,len) on JVM/Android, CC_SHA256 on Apple.
- Add scratch byte buffers to PointScratch: hashBuf(256), bytesTmp1/2(32),
scalarTmp1/2/3 for intermediate scalar results.
- Add ScalarN.reduceTo() allocation-free variant.
- Rewrite signSchnorrInternal to reuse scratch buffers for:
- dBytes serialization (bytesTmp1 instead of U256.toBytes alloc)
- AUX_PREFIX+auxrand hash (hashBuf instead of array concatenation)
- auxHash XOR (scalarTmp1/2/3 instead of U256.fromBytes allocs)
- nonce/challenge hash inputs (hashBuf instead of ByteArray alloc)
- nonce scalar (scalarTmp1 instead of ScalarN.reduce alloc)
- challenge scalar (scalarTmp3 instead of allocs)
- e*d and k+e*d (splitK1/entryTmp2 instead of ScalarN.mul/add allocs)
- Rewrite verifySchnorr to use hashBuf and sha256Into for challenge hash.
Only the 64-byte output signature is allocated per sign call.
Verify allocates nothing for 32-byte messages (hashBuf is large enough).
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
BIP-340 public keys always have even y, so the y-parity prefix byte
(0x02) is redundant when the caller already has the 32-byte x-only
pubkey. This new overload takes the x-only pubkey directly, avoiding:
1. The expensive G multiplication to derive the pubkey (~20μs on Android)
2. The 33→32 byte array copy that signSchnorrWithPubKey does internally
Added to:
- Secp256k1.signSchnorrWithXOnlyPubKey (core implementation)
- Secp256k1Instance (expect/actual, falls back to C lib's signSchnorr
since the native C lib always derives pubkey internally)
- Secp256k1InstanceOurs (uses the optimized pure-Kotlin path)
- Nip01Crypto.signWithPubKey (app-level convenience)
The app's KeyPair already stores the 32-byte x-only pubkey. Callers
like EventAssembler.hashAndSign can pass it through to skip the
G multiplication entirely.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Kotlin generates Intrinsics.checkNotNullParameter at the entry of every
function taking non-null reference types. Bytecode audit showed:
Before: 128 checkNotNullParameter calls across secp256k1 classes
After: 8 (only expression-value checks in non-hot paths)
Per Schnorr verify, this eliminates ~4,000+ invokestatic calls.
On ART (~2-3ns each): saves ~8-12μs per verify.
On HotSpot: neutral (C2 already optimizes null checks to fast branches).
These flags are safe for this module: all internal secp256k1 functions
use non-null LongArray/MutablePoint parameters that are never null.
Applied at the module level (compilerOptions) so all targets benefit.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Two optimizations for verifySchnorr:
1. Jacobian x-coordinate check before toAffine:
Instead of converting to affine first (1 inversion = ~270 field ops),
check X == r·Z² in Jacobian coordinates (1 sqr + 1 mul = 2 ops).
Invalid signatures (x mismatch) are rejected immediately without
paying the inversion cost. Valid signatures still need inversion for
the y-parity check. For Nostr, ~all sigs are valid so this mainly
helps adversarial/spam rejection.
2. Inline wNAF zero-checks in mulDoubleG inner loop:
~70% of wNAF digits are zero. Previously, each still called
addWnafMixedPP (function call overhead: null checks, frame setup).
Now the zero-check is inlined before the call, avoiding ~364
function calls per verify. On ART (5-8ns per call), this saves
~2-3μs. On HotSpot, the JIT already optimized this — no change.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
The fused fieldMulReduceWith + crossinline lambda was designed for ART
which struggles with deep call chains. On HotSpot C2, it creates a
2351-bytecode method (exceeding FreqInlineSize=325) that can't be
inlined into FieldP.mul, and wastes 180 bytecodes on lambda param
shuffling that C2 must clean up.
The unfused path (U256.mulWide + FieldP.reduceWide) produces a tiny
40-bytecode fieldMulReduce that HotSpot easily inlines. HotSpot's 8+
level inlining depth handles the full chain down to the
Math.unsignedMultiplyHigh intrinsic (single MULQ on x86-64).
Benchmark on JVM 21 x86-64: equivalent performance (1.5× verify,
0.9× sign-cached vs native C). Cleaner bytecode with no lambda waste.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Document WHY each approach was chosen, what alternatives were tested,
and what the measured impact was — so future contributors don't
accidentally revert optimizations or repeat failed experiments.
Key decisions documented:
- uLt() expect/actual: why XOR on Android, Long.compareUnsigned on JVM,
and why a shared inline fun in commonMain caused 30% JVM regression
- fieldMulReduceWith: why fused mul+reduce, why inline+crossinline,
why NOT 5x52 limbs, why NOT single-method with all API branches
- @JvmField: why it's required on MutablePoint/AffinePoint/PointScratch,
with bytecode counts showing ~7,450 + ~2,000 virtual getter calls
eliminated per verify
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Bytecode analysis showed MutablePoint.x/y/z, AffinePoint.x/y, and all
PointScratch properties compile to invokevirtual getter calls instead
of direct field reads (getfield). Per verify:
- MutablePoint getX/Y/Z: ~7,450 invokevirtual → getfield
- PointScratch getT/getW/etc: ~2,000+ invokevirtual → getfield
Each invokevirtual has ~3-5ns overhead on ART vs ~1ns for getfield.
@JvmField eliminates the getter method entirely, compiling property
access to a direct field read. On non-JVM targets (iOS), @JvmField
is silently ignored.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
Bytecode analysis revealed that every `a.toULong() < b.toULong()`
comparison generates 2 invokestatic calls to ULong.constructor-impl
(NOOPs that return the input unchanged) plus Long.compareUnsigned.
Across all secp256k1 hot paths, this produced 554 NOOP invokestatic
calls in the bytecode, translating to ~18,000 wasted calls per verify.
Replace all toULong() comparisons with an inline uLt() helper that
uses the XOR-with-MIN_VALUE trick directly:
(a xor Long.MIN_VALUE) < (b xor Long.MIN_VALUE)
This produces pure arithmetic bytecode (lxor, lcmp, ifge) with ZERO
method calls, eliminating all ULong.constructor-impl overhead.
Before: lload, invokestatic ULong.constructor-impl, lload,
invokestatic ULong.constructor-impl, invokestatic
Long.compareUnsigned, ifge (6 bytecodes, 3 method calls)
After: lload, ldc MIN_VALUE, lxor, lload, ldc MIN_VALUE, lxor,
lcmp, ifge (8 bytecodes, 0 method calls)
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
The previous approach inlined all 3 API-level branches into a single
fieldMulReduce method (~600 DEX instructions). ART's register allocator
produces suboptimal code for such large methods, causing stack spills
that negate the benefit of eliminating wrapper calls.
Split each API-level path into its own private function (~200 DEX
instructions each). ART JIT-compiles only the hot one (fieldMulApi35
on API 35+) with full optimization, while the tiny dispatch function
(fieldMulReduce) is easily devirtualized and inlined.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
On Android (ART), the unsignedMultiplyHigh wrapper function has per-call
branching for API level detection that prevents ART's JIT from inlining
the intrinsic into the hot loop. This creates ~10,000 extra function
calls per signature verify (20 wrapper calls × 500 field muls).
This commit introduces fieldMulReduce/fieldSqrReduce as expect/actual
functions that fuse U256.mulWide + FieldP.reduceWide into a single
compilation unit. The multiply-high intrinsic is passed as a crossinline
lambda and inlined at each call site, producing platform-specific code
with zero wrapper overhead:
- Android API 35+: Math.unsignedMultiplyHigh inlined directly (UMULH)
- Android API 31-34: Math.multiplyHigh + correction inlined (SMULH)
- Android API <31: pure-Kotlin fallback inlined
- JVM: Math.unsignedMultiplyHigh inlined directly
- Native: pure-Kotlin fallback inlined
The API level check happens ONCE per fieldMulReduce call (outermost
branch) rather than per multiply-high call (innermost loop), so ART
profiles and JIT-compiles only the hot path.
https://claude.ai/code/session_01EMY5RnXb9rnsyU2KbXrSaY
processCommit now detects ExternalInit proposals and allows the sender
leaf index to equal tree.leafCount (the new joiner's slot), matching
RFC 9420 Section 12.4.3.2 external commit semantics.
MlsKeyPackage.decodeTls no longer rejects non-0x0001 ciphersuites so
that interop test vectors with other suites round-trip correctly.
https://claude.ai/code/session_01LpR6qsF6nep1RnXA9KbXGs
Replace TODO stubs with pure Kotlin implementations of Ed25519 (RFC 8032) and
X25519 (RFC 7748) for native targets, completing Marmot MLS support on iOS.
Shared field arithmetic over GF(2^255-19) is extracted to nativeMain. Also
fixes MarmotSubscriptionManagerTest assertions to account for the ownKeyPackageFilter
added to buildFilters().
https://claude.ai/code/session_01LpR6qsF6nep1RnXA9KbXGs
With 256 slots and ~1000 followed users, the direct-mapped caches had
~75% collision rate (multiple pubkeys mapping to the same slot, causing
constant eviction and recomputation). Increasing to 1024 slots covers
most follow lists with minimal collisions.
Memory impact:
pubkeyCache: 1024 × ~96 bytes = ~96KB (was ~24KB)
pTableCache: 1024 × ~1KB = ~1MB (was ~256KB)
Total ~1.1MB — acceptable for mobile.
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
Add verifySchnorrBatch(pub, signatures, messages) that verifies n
signatures from the same public key using scalar and point summation
instead of n individual mulDoubleG calls.
The batch equation exploits linearity of Schnorr signatures:
(Σ sᵢ)·G = (Σ Rᵢ) + (Σ eᵢ)·P
This combines n verifications into:
- n scalar additions for S = Σsᵢ and E = Σeᵢ (trivial)
- n liftX + (n-1) addMixed for R_sum = ΣRᵢ (cheap point additions)
- ONE mulDoubleG(S, P, -E) (the expensive EC operation, done once)
- Check result - R_sum = O (no toAffine needed)
JVM benchmark results (same pubkey, 1000 iterations, 500 warmup):
batch( 4): 4.1x faster than individual (40,121 events/s)
batch( 8): 5.3x faster (49,637 events/s)
batch(16): 5.5x faster (49,815 events/s)
batch(32): 5.9x faster (51,272 events/s)
This fits the Nostr pattern perfectly: when loading a profile or
connecting to a relay, many events from the same followed author
arrive together and can be batch-verified.
If the batch fails (returns false), the caller falls back to
individual verification to identify which signature(s) are invalid.
Security: by linearity, individual errors cannot cancel without
solving the discrete log. For extra hardening, duplicate events
from multiple relays can be verified individually as cross-checks.
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
Inline the P = [P0, -1, -1, -1] constant into sub and neg instead
of going through generic U256.addTo/subTo + P array reads.
For sub (add-back P on borrow): when carry from limb 0 is 1, adding
P[1..3]=-1 with carry is identity (no-op). When carry is 0, just
subtract 1 with borrow propagation through limbs 1-3. Replaces a
full 4-limb generic addition with a conditional decrement.
For neg (P - a): uses bitwise NOT for limbs 1-3 (since P[i]=-1,
P[i]-a[i] = ~a[i]) with simple borrow propagation from limb 0.
Replaces a full 4-limb generic subtraction with P array reads.
These are called ~500 times per verify. On JVM/HotSpot the gain is
marginal (inlining already handles this), but on Android ART the
reduced function call depth and eliminated array loads should help.
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
Pool toAffine/toAffineX temp LongArrays (zInv, zInv2, zInv3) into
PointScratch. Add scratch-aware overloads that hot paths now use,
keeping allocating convenience overloads for one-time init paths
(buildCombTable).
Consolidate verify/sign/pubCreate/ECDH scratch into shared entry*
fields in PointScratch (entryPx, entryPy, entryPoint, entryResult,
entryTmp, entryTmp2). This replaces the old verify-specific fields
(verifyPx/Py/R/S/E/Rx/Ry/PPoint/Result) with fewer, shared buffers.
Update all Secp256k1 entry points (pubkeyCreate, signSchnorr,
signSchnorrInternal, verifySchnorr, pubKeyTweakMul, ecdhXOnly)
to use scratch instead of per-call allocations.
Add KeyCodec.liftX overload accepting a temp buffer to avoid 1
LongArray allocation per call.
Eliminate 2 longArrayOf allocations in ScalarN.reduceWideTo by
reusing the output array as temporary storage for hi limbs.
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
Extract MutablePoint, AffinePoint, and PointScratch from Point.kt into
PointTypes.kt (140 lines). Rename Point.kt to ECPoint.kt (897 lines)
to match the single top-level declaration (ktlint convention).
Remove dead code:
- addWnafJacobian: private function never called (replaced by
addWnafMixedPP with effective-affine tables)
Remove 5 KeyCodec wrapper functions from ECPoint that just delegated
(liftX, hasEvenY, parsePublicKey, serializeUncompressed,
serializeCompressed). Callers in Secp256k1.kt and PointTest.kt now
use KeyCodec directly, making ownership clear: KeyCodec owns key
encoding/decoding, ECPoint owns point arithmetic.
Update Secp256k1.kt header documentation with current benchmark
numbers (verify 1.7x, sign 0.9x faster than native, etc.) and
a concise list of optimizations.
No functional or performance changes — all 170 tests pass, benchmark
numbers unchanged.
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
In mulDoubleG (verify), the P-side wNAF-5 affine table (8 odd multiples
of P plus 8 GLV λ counterparts) is rebuilt from scratch on every call.
This costs ~437 field ops: 1 doublePoint + 7 addPoints + 8 β-multiplies
+ 1 batch inversion with full field inversion (~270 ops alone).
Add a 256-entry direct-mapped cache that stores these affine tables
keyed by the point's x-coordinate. On cache hit, the table build is
skipped entirely — the cached arrays are used directly (zero-copy).
This saves ~27% of mulDoubleG cost (~20% of total verify) for repeated
pubkeys. Combined with the liftX cache from the previous commit,
repeated-pubkey verifications now skip ~33% of the work.
JVM benchmark: verify ratio improved from 2.0x to 1.6-1.8x vs native C
(with the benchmark's 100% cache hit rate). Original baseline was 3.0x.
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
Add in-place ScalarN operations (mulTo, addTo, negTo) that write to
caller-provided output arrays instead of allocating. Add
Glv.splitScalarInto that uses pre-allocated scratch buffers from
PointScratch, eliminating ~26 LongArray allocations per call (called
2x per verify = ~52 allocs saved). Both mul and mulDoubleG now use
the allocation-free split path.
Pool all LongArray and MutablePoint allocations in verifySchnorr
into thread-local PointScratch (verifyPx/Py/R/S/E/Rx/Ry, verifyPPoint,
verifyResult). Add U256.fromBytesInto for decoding into pre-allocated
arrays. Total: ~14 object allocations eliminated per verify call.
Add pubkey decompression cache (256-entry direct-mapped) that skips
the liftX square root (~280 field ops) for repeated pubkeys. In Nostr,
the same authors are verified repeatedly, so cache hit rate is high.
This saves ~13% of verify cost per cache hit.
Increase benchmark warmup/iterations for more stable measurements
(e.g., verifySchnorr: 200/500 -> 2000/5000).
JVM benchmark result: verify ratio improved from 3.0x to 2.0x vs
native C (with 100% cache hit rate on the benchmark's single pubkey).
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
The previous counts (200 warmup / 500 iterations for verify) were too
low for reliable measurements on noisy VMs. Increase to 2000+ warmup
and 3000-50000 iterations depending on operation cost, giving the JIT
time to fully optimize and reducing variance between runs.
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
Unroll hot-path loops in U256 (mulWide, sqrWide, addTo, subTo) to
eliminate loop control overhead and array bounds checks that ART JIT
on Android does not optimize as aggressively as HotSpot. These functions
are called ~1,900× per signature verification.
Optimize unsignedMultiplyHighFallback to compute the unsigned 128-bit
product directly from 32-bit sub-products, avoiding the signed
multiplyHigh + correction path. Saves ~8 instructions per call on
Android < API 31 (~30,000 calls per verify).
Unroll FieldP.reduceWide carry propagation and inline the reduceSelf
subtraction (avoiding P array access and U256.subTo call). Unroll
FieldP.half with P[1..3]=-1 inlined as mask.
Replace copyFrom pattern in mul, mulG, and mulDoubleG with ping-pong
point buffers — alternate between two MutablePoints via reference swap
instead of copying 12 Longs after every addition. Eliminates ~170
copyFrom calls per verify and avoids the internal copy buffer in
doublePoint's out===inp path (~130 per verify). Also removes the
MutablePoint() allocation in mulG (3 LongArrays per sign/pubCreate).
https://claude.ai/code/session_017UbWduFi1sLUsgVUMUH2nx
- H11: Cache skipped message keys in SecretTree for out-of-order decryption
- L1: Prune sentKeys map when exceeding 10000 entries
- L2: Prune consumed generations below current minimum
- H17: Call markAsRead when chat view is opened
- Key zeroing: Zero old private keys in KeyPackageRotationManager
https://claude.ai/code/session_018gVkmmYgMFtBH7G31pCk9N
Claude